User's Manual

JULY/04/2005
ALA225 3
2. Push the Valet switch 6 times and holding in on the 6th push until three chirps with a long chirp is hearing
then release the valet switch. You are now in the Alarm feature ‘Shock Sensor’ programming mode.
3. Press and hold
button for 2 seconds. One long siren chirp to indicates the unit is ready to accept
adjustments of the shock sensor.
4. Press
button on the transmitter once will decrease sensitivity level by one, each time an decrease is
made the siren chirp will respond with [1] chirp, while 2 chirp indicates the minimum of sensitivity.
5. Press
button on the transmitter once will increase sensitivity level by one, each time an increase is
made the siren/horn chirp will respond with [1] chirp, while 2 chirp indicates the maximum of sensitivity.
6. Hit the bumper or strong metal part of the vehicle to test the threshold level of the sensor.
a). Activate the warn-away (first stage the shock sensor), the siren will emit a short chirp.
b). Activate the full alarm (second stage the shock sensor), the siren will emit a long chirp.
7. When you are satisfied with the setting, press
and buttons at the same time. One long siren chirp to
indicates the unit is lock in the adjustment.
Note: If 20 seconds of inactivity expire, or turn on the ignition during of above steps, the unit will exit the
program mode and return to the disarmed mode. Three long chirps to confirm exit.
OPERATION MANUAL
TRANSMITTER OPERATION:
Transmitter Button System Function Remark
Arm & Lock door
-
Arm & Delete The Shock Sensor Press twice within 3 seconds.
Car Locator Upon Armed.
(3 seconds)
Panic function Press and hold for 3 seconds
Disarm & Unlock Door
-
Disarm &Two Steps Door Unlock Press twice within 3 seconds.
(2 seconds)
Disarm & Pop Trunk Release Press and Hold for 2 seconds
+
Silent Arm / Disarm Upon Ignition off
+ (2 seconds)
Activate Car-Jacking Upon Ignition on
LED INDICATORS:
LED Function LED Function
Off Disarmed 2 flashes... pause Trigger on trunk/hood
Slow flash Armed 3 flashes... pause Trigger on door switch
Fast flash Passive arming 4 flashes... pause Trigger on Dual Zone Shock Sensor
On (solid) Valet mode 5 flashes... pause Trigger on Ignition switch
CHIRP INDICATORS: PARKING LIGHT:
Chirp Function Parking light Function
1 chirp Arm 1 flash Arm
2 chirps Disarm 2 flashes Disarm
3 chirps Ajar Warning 3 flashes Disarm / Intrusion
4 chirps Disarm / Intrusion 12 flashes Car Locator
6 chirps Car Locator
ACTIVE ARMING – LOCK & ARM:
1. Press button on transmitter.
2. The siren will chirp once and parking light will flash once indicating that the system is now armed. The
vehicle doors will lock upon arming when interfaced with the security system.
Ajar Warning: If the siren sounds 3 chirps, then you have left a door, trunk, or hood lid ajar.
Silent Arming / Disarming:
Press the and buttons at same time will arm or disarm your security
system, No chirp sound will be heard, arm / disarm confirmation will be through the vehicles parking lights
only.
Shock Sensor By-Pass: Press the
button twice within 3 seconds will arm the security system, by-pass
the shock sensor. The system will chirp one additional time to confirm the sensor bypass mode was activated.
The sensor bypass feature is programmed to activate for one arming cycle only. The security system will
return to normal operation during the next arming cycle.
PASSIVE ARMING: