User's Manual
19
5. ACCESSORY CONNECTORS
6 Pin Override Push-Button and LED
The status LED / override button should be mounted in a visible and easily accessible location on the
driver’s dashboard area. Route the harness and plug the 6 pin connector into the module.
4 Pin Tracking Port: (Off White Connector)
This 4 pin port is used for connecting the PROPT20 PursuiTrak GPS system.
4 Pin Data Bus Interface Port: (Brown Connector)
This 4 pin port is used for Flashlogic Door Lock and Transponder Databus Interfaces to communicate with
the vehicle's Databus. When using the DBI port to control the Flashlogic Door Lock and Transponder
Interface modules the following options may be available. Please refer to the D2D (Data to Data) function list
available per vehicle on the tech service web site.
Door Trigger Trunk/Hatch Open
Keyless Entry Control Dome Light Supervision
Factory Alarm Arm / Disarm Manual Arm / Disarm Inputs (factory keyless controls system)