User Manual

Defaulting Selectable Features
1. Ignition ON
2. Press and Hold Override Button for 10"
3. Parking Lights will flash and horn will honk 3 times
4. Press button on Module
5. System will default all setting and honk 4 times which will place the user at the selectable
feature programming bank
Adjusting the Shock Sensor
1. Turn the adjustment screw clockwise (increasing sensitivity)
2. Turn the adjustment screw counter clockwise (decreasing sensitivity)
Testing the Shock Sensor
Arm the alarm. Wait for 6" for the zone to stabilize, and then firmly strike the vehicle's bumper.
LOT MODE PROGRAMMI NG SPECI FI CATI ONS:
Transmitter Programming
1. Ignition ON
2. Press and Hold Override Button for 10"
3. Parking Lights will flash and horn will honk 3 times
4. Punch in Vehicle I D from ACM Keypad and press LOCK
5. System will chirp 3 times to acknowledge LOT MODE
Selectable Feature Programming
1. Ignition ON
2. Press and Hold Override Button for 10"
3. Parking Lights will flash and horn will honk 3 times
4. Press and release programming button
5. Parking lights will flash and horn will honk 4 times to acknowledge feature programming
LOT MODE defaults feature Chart
LED flash 1 LED flash 2 LED flash 3
Security Function ON off
Passive Locks On Off
2 stage unlock 2 stage 1 stage
Passive Arming on off
Entry Delay on off
Siren/ Horn siren horn
Door trigger delay instant 30 second
Chirps On Off
Extended Locks 0.9 3 double pulse U/ L
Ignition Lock On Off
Tan wire Output Trunk 2nd Unlock illuminated Entry
Unlock Sense I nput NEG POS
Horn output timing 16ms 30ms 45ms
ITS Functionality off On