User's Manual
2. Push the Valet switch 3 times and hold in on the 3
rd
push; when a long chirp is
heard then release the valet switch. You are now in the Transmitter programming
mode.
Program:
1. Press any button on the first transmitter until the siren responds with a confirming
chirp; the first transmitter is now programmed.
2. Press any button on the second transmitter until the siren responds with a
confirming chirp; the second transmitter is now programmed.
3. Apply the same procedure to program any 3rd and 4
th
transmitters.
Exit: Turn Ignition to 'OFF' position, or leave it for 15 seconds. 3 long chirps will
confirm exit.
Note: If more than 4 transmitters programmed, the system will only keep the last 4
transmitters.
ALARM FEATURE “I” PRORAMMING:
1. Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch 2 times and hold in on the 2
nd
push; when a long chirp is heard
then release the valet switch. You are now in the Alarm feature ‘I’ programming
mode.
3. Press the transmitter button corresponding to the feature you want to program.
a. The factory default settings is always [1] LED flash, [1] chirp.
4. Depress the transmitter button again to change the feature. Simply keep pressing
the transmitter button again until the module advances to your desired setting.
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory Default Setting
Two Chirps /
LED two pulse
1
Chirps on Chirps off
2
Automatic Rearm On Automatic Rearm Off
3
With Door Ajar error chirp Bypass Door Ajar error chirp.
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. 3 long chirps will confirm exit.
ALARM FEATURE “II” PRORAMMING:
1 Turn the Ignition 'switch ‘ON/OFF’ 3 TIMES and stay in OFF position.
2 Push the Valet switch 4 times and hold in on the 4
th
push; when a long chirp is
heard, then release the valet switch. You are now in the Alarm feature ‘II’
programming mode.
3 Press the transmitter button corresponding to the feature you want to program.
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory Default
Setting
Two Chirps /
LED two pulse
Three Chirps /
LED three pulse
1
0.9-second Door lock
pulses.
3.0-second Door lock
pulse.
Double pulse unlock