User's Manual

APRIL /29/2004
400S 美 9
3-a. Test the Zone 2 Instant Ground Trigger & Zone 3 Door Trigger:
Press and release the transmitter button once. [1] LED flash, [1] siren/horn chirp to indicate you are
in Zone 2 / instant ground trigger and Zone 3 / Door trigger test mode.
Trigger sensor Siren chirps
Zone 2 / Instant Ground trigger (H7/2 Blue/White wire) 2
Zone 3 / Door trigger (H7/3 Violet & H7/5 Green Wire) 3
3-b. Test the Zone 1 /2 Shock Sensor (Connected to H2 4 Pin Plug):
Press and release the transmitter button again. [2] LED flash, [2] siren/horn chirps to indicate you
are in shock sensor (connected to H2 4 pin plug) test mode.
1. Activate the warn-away (first stage optional sensor), system will emit a short chirp.
2. Activate the full alarm (second stage optional sensor), system will emit a long chirp.
3. Continue to test the optional sensor until reach the proper sensitivity.
Return To Factory Default Setting:
1. Turn the ignition ON then OFF 3 TIMES and stay in OFF position.
2. Push the Valet switch 12 times and holding in on the 12
th
push until six chirps with a long chirp is hearing
then release the valet switch. You are now in the “ Return To Factory Default Setting” programming mode.
3. Press the and buttons at the same time on the transmitter together for 5 seconds, there will be a
confirmation six chirp with 3 long chirp to confirm the system “ Alarm Feature I & II & III & IV Programming
all returns to factory default setting.
OPERATION
A. TRANSMITTER OPERATION:
Transmitter Button System Function Remark
Lock Doors & Arm System
-
Arm and Delete The 2 Stage Shock Sensor. Press twice within 3 seconds
- -
Arm and Noiseless Mode Press within 3 seconds
-
Arm System and Hidden Alarm Function Press within 3 seconds
Car Locator Upon armed
(3-second)
Panic function Press and Hold for 3 seconds.
+
Silent Arming / Disarming Ignition in "off" position.
+ (2-second)
Active Anti Car-Jacking Mode Ignition in "on" position press and
hold for 2 seconds
Unlock Doors & Disarm System
-
Two Steps Door Unlock & Disarm System Press twice within 3 seconds.
(2-second)
Trunk Release (Channel 3) Press and Hold for 2 seconds
-
Passive Arming By-pass While the system Disarmed.
- -
Remote Control Entry/Exit Valet Mode While the system Disarmed,
Press within 3 seconds
+
Channel # 4 Timer Output
Switching code For 2nd Car Operation. For regular remote transmitter
B.LED INDICATORS:
LED Status LED Status
Off Disarmed 2 flashes... pause Zone 2 / Trigger on Trunk/Hood
Slow flash Armed 3 flashes... pause Zone 3 / Trigger on Door Switch
Fast flash Passive arming 4 flashes... pause Zone 4 / Trigger on Shock Sensor
On (solid) Valet mode 5 flashes... pause Zone 5 / Trigger on Ignition Switch
C. CHIRP INDICATORS: D. PARKING LIGHT:
Chirp Function Parking light Function