User's Manual

APRIL /29/2004
400S 美 6
B. ALARM FEATURES PROGRAMMING:
ALARM FEATURE “I” PRORAMMING:
1. Turn the Ignition 'switch ‘ ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch 2 times and holding in on 2
nd
push until one chirp with a long chirp is hearing then
release the valet switch. You are now in the Alarm feature ‘ I’ programming mode.
3. Press and release the transmitter button ‘ A’ corresponding to the feature ‘ A’ you want to change.
a. The siren chirps and LED pause will indicate newly setting.
b. The system would advance to [2] LED flash, [2] chirp. (The factory default settings are always [1] LED
flash, [1] chirp.)
4. Depress the transmitter button ‘ A’ again to change the feature again. Simple keep re-depressing the
transmitter button ‘ A’ again until the module advances to your desired setting.
5. Depress the transmitter button ‘ B’ corresponding to the feature ‘ B’ you wants to program.
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory Default
Setting
Two Chirps /
LED two pulses
Three Chirps /
LED three pulses
Four Chirps /
LED four pulses
1
All Chirps off All Chirps on Siren Chirps on only Horn Chirps on only
2
Automatic Rearm off Automatic Rearm on
3
45 seconds Delay
Door Ajar error chirp.
Instantly Door Ajar
error chirp
4
+
Without Car-jack
mode
Active Car-jack mode Passive Car-jack
mode
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps to confirm exit.
ALARM FEATURE “II” PRORAMMING:
1. Turn the Ignition 'switch ‘ ON/OFF’ 3 TIMES and stay in OFF position.
2. Push the Valet switch 4 times and holding in on the 4
th
push until two chirps with a long chirp is hearing
then release the valet switch. You are now in the Alarm feature ‘ II’ programming mode.
3. Press and release the transmitter button ‘ A’ corresponding to the feature ‘ A’ you want to program.
Press
Transmitter
Button
One Chirp /
LED one pulse
Factory Default
Setting
Two Chirps /
LED two pulses
Three Chirps /
LED three pulses
Four Chirps /
LED four pulses
1
0.9-second Door
lock pulses.
3.5-second Door lock
pulse.
Double pulse unlock Door lock with
“ Comfort Feature”
2
Active arming Passive arming
without passive door
locking
Passive arming with
passive door locking.
3
Ignition controlled
door locks &
unlocks
Ignition controlled
door locks only
Ignition controlled
door unlocks only
Without ignition
controlled door locks
& unlocks
4
+
Pathway illumination
feature “ off”
Parking light “ on” for
30- second upon an
unlock signal
Parking light “ on” for
30- second upon an
unlock signal &
10-second upon a
lock signal.
Exit: Turn Ignition to 'ON' position, or leave it for 15 seconds. A 3 long chirps to confirm exit.
Comfort Feature:
Some Vehicles have a special “ COMFORT feature” . When you lock the door with the key, you just have to
keep on turning the key on the door about 5 or 7 seconds and the window will close directly.
If your vehicle with “ COMFORT feature” and you wish the door being locked and the window being closed
automatically at the same time by remote control, You can set the alarm feature
II-1
“ with comfort feature” .
ALARM FEATURE “III” PRORAMMING:
1. Turn the Ignition 'switch ‘ ON/OFF’ 3 TIMES and stay in OFF position.