User's Manual

Override Switch Operation (Continued)

Override Operation: (Security System is Armed)

1. Enter the vehicle (the security system will begin sounding at this point).

2. Place the ignition key into the ignition switch and turn the switch to the “On” position.

3. Within 5 seconds of turning the ignition key “On”, place the override switch to the “On” position.

4. The horn/siren will stop sounding.

5. The LED indicator will be solid red.

The security system is overridden.

Note 1: If the override switch is already in the “On” position when you turn “On” the ignition key, the override

function will be bypassed. Turn “Off” the ignition key, place the override switch in the “Off” position and try

again.

Note 2: If you fail to place the

override

switch to the “On” position within 5 seconds of turning “On” the

ignition key, the override function will be locked-out. Place the switch in the “Off” position, turn “Off” the

ignition key and try again.

Remote Panic:

Press and hold the LOCK or PANIC button for more than 3 seconds and the security system will respond in

the following manner:

A. The horn/siren will begin sounding.

B. The parking lights will begin flashing.

To turn off the panic alarm, press and release the UNLOCK or PANIC button. The horn/siren will stop

sounding and the parking lights will stop flashing.

Note: If you do not turn off the panic feature with the transmitter, the panic alarm will sound for 60

seconds and then turn off by itself.

Remote Valet Mode Operation:

Activate Valet Mode

1. Turn the ignition key to the “Off” position and open any door.

2. Press and hold down the LOCK +

buttons.

3. The door locks will lock and unlock. Release the buttons.

4. The LED will begin to flash every 5 seconds indicating that the system is in Valet Mode.

Exit Valet Mode

1. Turn the ignition key to the “Off” position and open any door.

2. Press and hold down the UNLOCK +

buttons.

3. The door locks will lock and unlock. Release the buttons.

4. The LED will be off indicating that the system is out of the Valet Mode.

PLUS-4800-UM.qxp 2/7/05 2:43 PM Page 4