User's Manual

13
Step 5: Transmitter Programming
(Continued)
Push Lock Button
The LED will begin flashing slowly and the horn/ siren will emit 1 short chirp. The code has now been learned.
The transmitters supplied are pre-programmed to the receiver module. You should use the following instructions when
adding a new or replacement transmitter.
Step 6
Turn Off the Ignition
The horn/ siren will emit 1 short chirp
and 1 long chirp. You are now out of the
consumer transmitter code learning
mode.
The LED is Off.
OFF
Step 5
Lock
Unlock
Panic
Aux
Regular Transmitter
Lock
Unlock
Panic
Aux
Passive Transmitter
(Optional)
Passive
Unlocking
ON
Step 1
Turn On Ignition
Flip the Override Switch
On then Off 6 Times
The siren will emit 1 long chirp and 1
short chirp. You are now in the
transmitter code programming mode.
The LED will be a solid red.
Step 2
6x
Step 6: Remote Feature Programming
PLUS-4800-IM.qxp 2/7/05 2:40 PM Page 13