User's Manual

I. ACTIVE DISARMING :

1. Press disarm button on the transmitter.

2. The siren will chirp twice to indicate that system disarmed.

NOTE: 1. Tamper disarming: If alarm triggered, upon disarm the system, siren chirp 4 times,parking light

flash 3 times.

NOTE: 2. Automatic re-arm: No doors open and no ignition on after disarm; after 60 seconds system auto

rearm.

J. PANIC FUNCTION :

The transmitter can be used as a remote panic switch to manually trigger the alarm in case emergency. To

do so, hold button 4 for 1 second, and the system will full alarming. To stop panic, press button 4 again or

press disarm button.

K. TRIGGER THE SYSTEM :

While system in armed condition, open the doors, hood, trunk or trigger the optional sensors, siren and

parking light will turn on to alerting of an intrusion for 30 or 60 seconds. Then it will stop and automatic

reset and re-arm. If the one of sensors or detectors still active, the alarm system will sound a maximum of

3 times of 30 or 60 seconds cycles.

L. DOME LIGHT CONVENIENCE DELAY & SUPERVISION :

Upon disarming, the dome lights will remain on for 30 seconds.

If the vehicle triggered, the dome light will flashing as the same duration as siren.

Note: Turn on the ignition switch or arm the alarm will turn off the dome light.

M. ANTI CAR-JACKING :

Warning: If you don't want to have car jacking in this alarm system, be sure to set car-jacking off.

This system is default setting all car-jacking OFF.

In this system totally there are 3 features of entering car-jacking.

First: Use transmitter to enter car-jacking. (Program transmitter car-jacking ON, see programming

features)

This feature provides user to remote activates car-jacking. When programmed this feature ON,

upon the ignition switch is 'on', user can press button 1 + 2 together for 1 second to enter car-

jacking.

Second: Use ignition switch turn to 'on' position to enter car-jacking. (Program ignition car-jacking ON, see

programming features). This feature provides user to use ignition switch to activate car-jacking.

When programmed this feature ON, upon turn the ignition switch to 'on' position, the system enter

car-jacking.

Third: Use Door open close to enter car-jacking. (Program door car-jacking ON, see programming

features)

This feature provides user to use door open close to activates car-jacking. When programmed this

feature ON, upon the ignition switch is 'on', if someone open door and close door the system enter

car-jacking.

2-timer circuits will function as follows:

First timer:

50 seconds after activates car-jacking. The siren will start chirping. Within 10 seconds, you will be alert

to turn the ignition switch from off to on, and push valet switch to turn off the car jacking feature. If not, it

will enter second timer car jacking.

Second timer:

Totally after 60 seconds from beginning, siren still alarming and parking light flashing, and the starter

disable will activate to prevent the vehicle from starting. Override the system to turn off car jacking.

(Ignition from off to on, and within 10 seconds push valet switch)