User's Manual

6
Button 1 + 2 both Silent arm/disarm Ignition in "off" position.
Button 1 + 2 both 1 sec Activate car-jacking Ignition in 'on' position and
Programmed transmitter car-
jacking "ON"
Button 2 + 3 both Channel 4 control
Side button Switching code system
For auto channel setting:
Transmitter Button System Function Remark
Button 1 Arm & door lock
Button 1 Panic function Press 3 sec.
Button 1 - 1 Arm and delete optional sensor Press twice.
Button 2 Disarm & door unlock
Button 2 -2 Two steps door unlock Press twice.
Button 3 Channel 2 (trunk) control Press 2 sec.
Button 3 - 3 Passive arming by-pass Under passive arming press twice.
Button 3 - 3 Car locator Press twice
Button 1 + 3 both Channel 3 control
Button 4 Panic Press 1 seconds.
Button 1 + 2 both Silent arm/disarm Ignition in "off" position.
Button 1 + 2 both 1 sec. Activate car-jacking Ignition in 'on' position and
Programmed transmitter car-
jacking "ON"
Button 2 + 3 both Channel 4 control
Side button Switching code system
B. UNIQUE OPTIONAL PASSIVE/ACTIVE TRANSMITTER :
This system has a passive/active transmitter (PT) design that allows you to arm/lock and disarm/unlock the
system passively or actively. The active usage is the same as above operation. Below is the passive
operation:
1. Slide the passive switch to ‘ON’ position on the front case.
2. When you move toward your vehicle around 10 meters, system will automatically disarm and unlock the
doors.
3. When you leave your vehicle over 10 meters, and after 10 seconds system will automatically arm and
lock the doors.
4. In case the system armed and lock all doors, while you leave your ignition key and this transmitter inside
the vehicle. Rock the vehicle the transmitter will disarm and unlock the doors.
Note:
1. Time delay:
Upon you are active pressing the button on the transmitter, the system will set a 60 seconds time delay
for the passive feature. For example you press any button on the transmitter, the passive feature will not
works in 60 seconds.
2. Turning the Passive System Off
You can disable the passive feature by moving the transmitter's slider switch to OFF. It will turn into
normal active transmitter.
C. LED DISPLAY :
LED Function LED Function
Off Disarmed 2 flashes... pause Trigger on trunk/hood
Slow flash Armed 3 flashes... pause Trigger on door switch
Fast flash Passive arming 4 flashes... pause Trigger on sensor
On (solid) Valet mode 5 flashes... pause Trigger on PIR Door / window sensor