User's Manual

4
During programming, if you don’t respond to previous step in 15 seconds, or any time press transmitter’s
button 1, it will exit features programming, which indicates by 3 long chirps.
FIRST STAGE:
Push valet
switch times:
Chirp, parking
light flash times
Turn ignition from
'OFF' to 'ON'
Turn ignition from
'ON' to 'OFF'
Show 1 short chirp 2 short chirps
Select Feature " ON " Feature " OFF "
1 1 Current sensor ON Current sensor OFF
2 2 Chirp ON Chirp OFF
3 3 Active arming Passive arming
4 4 Rearm ON Rearm OFF
5 5 When door close dome light on
(Vehicle equip interior light delay)
No defective chirp reminder.
When door close dome light off
(Vehicle no interior light delay)
With defective chirp reminder.
6 6 Transmitter car-jacking OFF Transmitter car-Jacking ON
7 7 Ignition car-jacking OFF Ignition car-jacking ON
8 8 Door car-jacking OFF Door car-jacking ON
SECOND STAGE:
Push valet
switch times:
Chirp parking
light flash times
Turn ignition from
'OFF' to 'ON'
Turn ignition from
'ON' to 'OFF'
Show One short chirp Two short chirps
Select Feature " ON " Feature " OFF "
1 1 Lock/unlock 0.8 sec. Lock/unlock 3.5 sec.
2 2 2-pulse unlock OFF. 2-pulse unlock ON.
3 3 Passive door lock ON Passive door lock OFF.
4 4 Ignition on door lock ON Ignition on door lock OFF
5 5 Ignition off door unlock ON Ignition off door unlock OFF
6 6 Disarm parking light OFF. Disarm parking light on 30"
7 7 Password OFF. Password ON.
NOTE:
For system programming features all returns to presetting "ON", turn the ignition 'on' then 'off'. Within 15
seconds push the valet switch 3 times. (A long chirp.) Then press button 1 and 2 together for 5 seconds, there
will be a confirmation long chirp.
D. Testing sensors:
In this test mode, this system can test shock sensor sensitivity and other sensor. The installer can save time
to test the shock sensor sensitivity and sensor without using the traditional arming/disarming procedures to
test the sensors.
ENTER:
1. System under disarm or valet condition.
2. Turn ignition switch on then off.
3. Within 15 seconds, push valet switch 3 times.
4. There will be a long chirp confirmation to enter the test mode.
Trigger sensor Siren chirps
Negative pin switch 2
Voltage sensor 3
Optional wireless PIR or door switch 5