User's Manual

2. Renew IP Forever: this feature enables this product to renew your IP address automatically when

the lease time is expiring-- even when the system is idle.

4.4.1.3 Dynamic IP Address with Road Runner Session Management.(e.g. Telstra BigPond)

1. LAN IP Address is the IP address of this product. It must be the default gateway of your

computers.

2. WAN Type is Dynamic IP Address. If the WAN type is not correct, change it!

3. Host Name: optional. Required by some ISPs, e.g. @Home.

4. Renew IP Forever: this feature enable this product renew IP address automatically when the

lease time is being expired even the system is in idle state.

4.4.1.4 PPP over Ethernet

1. PPPoE Account and Password: the account and password your ISP assigned to you. For security,

this field appears blank. If you don't want to change the password, leave it empty.

2. PPPoE Service Name: optional. Input the service name if your ISP requires it. Otherwise, leave

it blank.

3. Maximum Idle Time: the amount of time of inactivity before disconnecting your PPPoE session.

Set it to zero or enable Auto-reconnect to disable this feature.

4. Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The most

common MTU value is 1492.

5. Connection Control:There are 3 modes to select:

Connect-on-demand:The device will

link up with ISP when the clients send outgoing packets.

Auto-Reconnect(Always-on):The device will link upw with ISP until the connection is established.

Manually:The device will not make the link until someone clicks the connect-button in the

Staus-page.

4.4.1.5 PPTP

1. My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned

to you.

2. Server IP Address: the IP address of the PPTP server.