User's Manual

Definition of each field
- SSID: Name of BSS of IBSS network.
- BSSID: MAC address of AP or randomly generated of IBSS.
- Signal: Receive signal strength of specified network.
- Channel: Channel in use.
- Encryption: Encryption algorithm used within than BSS or IBSS. Valid value includes WEP, TKIP, AES, and
Not Use.
- Authentication: Authentication mode used within the network, including Unknown, WPA-PSK, WPA2-PSK,
WPA and WPA2.
- Network Type: Network type in use, Infrastructure for BSS, Ad-Hoc for IBSS network.
Connected network
When utility first ran, it will select the best AP to connect automatically. It is available to connect to other site by double
click the intended item. If the intended network has encryption other than '' Not Use '' or “Unknown”, the security page
will pop up for you to setup the appropriate information to make the connection.
: This icon indicates the change is successful.
- Connection box: Indicate connection status, the connected network SSID will show up here.
- Rescan: Issue an rescan command to wireless NIC to update information on surrounding wireless network.
- Connect: Command to connect to the selected network.
- Add to Profile: Add the selected AP to profile setting. It will bring up profile page and save the setting to a new
profile.
Add/Edit Profile
System Configuration
- 6 -