User's Manual

set up the authentication security. The function of each session is shown below
Authentication & Security
When the Encryption feature is enabled, the other setups are same as the WEP setting.
- Authentication Type: There are three type of authentication modes supported. They are open, Shared, WPA-PSK
and WPA system.
- 802.1x Setting: It will display to set when user use radius server to authenticate client certificate for WPA
authentication mode.
- Encryption Type: For open and shared authentication mode, the selection of encryption type are None and WEP.
For WPA, WPA2, WPA-PSK and WPA2-PSK authentication mode, the encryption type supports both TKIP and
AES.
- WPA Pre-shared Key: This is the shared secret between AP and STA. For WPA-PSK and WPA2-PSK
authentication mode, this field must be filled with character longer than 8 and less than 32 length.
- WEP Key: Only valid when using WEP encryption algorithm. The key must matched AP key. There are several
formats to enter the keys.
-- Hexadecimal、40bits：10 Hex characters.
-- Hexadecimal、128bits：32Hex characters.
-- ASCII、40bits：5 ASCII characters.
-- ASCII、128bits：13 ASCII characters.
- 8 -