User's Manual

Appendix C Console Mode (optional)

When you forget the system password or the IP address of this product, you need enter console mode to

reset them.

Before invoking the console program, be sure to find a null modem cable and use it to connect from

this product’s COM port to your computer’s COM port. Then, execute a terminal program, such as the

Hyper Terminal of MS Windows 95. The connection parameters should be set to 19200 8-N-1. And,

reboot this product. When the M1 indicator starts flashing regularly, you can press the “Enter” key of

the keyboard several times, there should be some messages and console prompt ">" appeared in the

terminal.

In the console mode, you may reset the IP address and the system password of this product. Please

remember to execute the SR command to save the changes you have made. For example,

IP 192.168.123.254

PW admin