User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Network Settings and Software Installation
- Chapter 4 Configuring Wireless Broadband Router
- Appendix A 802.1x Setting
- Appendix B WPA-PSK and WPA
- Appendix C FAQ and Troubleshooting
2.1.2. Rear Panel
Figure 2-2 Rear Panel
LED:
LED Function Color Status Description
Status
System
status
Green Blinking
Status is flashed once per second to indicate system is
alive.
WAN
WAN port
activity
Green On The WAN port is linked.
Blinking The WAN port is sending or receiving data.
WLAN
Wireless
activity
Green
Blinking Sending or receiving data via wireless
Link.
1~4
Link status Green On
An active station is connected to the corresponding
LAN port.
Blinking
The corresponding LAN port is sending or receiving
data.
Speed
10/100
Data Rate
Green
On
Data is transmitting in 100Mbps on the corresponding
LAN port.
Reset To reset system settings to factory defaults
Button
Special
application
7