User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Network Settings and Software Installation
- Chapter 4 Configuring Wireless Broadband Router
- Appendix A 802.1x Setting
- Appendix B WPA-PSK and WPA
- Appendix C FAQ and Troubleshooting
Wireless functions
z High speed for wireless LAN connection
Up to 80Mbps data rate by incorporating Orthogonal Frequency Division Multiplexing
(OFDM).
z Roaming
Provides seamless roaming within the IEEE 802.11b (11M) and IEEE 802.11g (54M) and
IEEE 802.11n (6.5M) WLAN infrastructure.
z WDS(Wireless Distribution System): It is a system that enables the interconnection of access
points wirelessly.
z WPS(WiFi Protection Setup):WPS is WiFi Protection Setup which is similar to WCN-NET
and offer safe and easy way in Wireless Connection.
z IEEE 802.11b compatible (11M) & IEEE802.11g compatible (54M)
Allowing inter-operation among multiple vendors.
z IEEE 802.11n compatible (6.5M)
Allowing inter-operation among multiple vendors.
Security functions
z Packet filter supported
Packet Filter allows you to control access to a network by analyzing the incoming and
outgoing packets and letting them pass or halting them based on the IP address of the source
and destination.
z Domain Filter Supported
Let you prevent users under this device from accessing specific URLs.
z URL Blocking Supported
URL Blocking can block hundreds of websites connection by simply a keyword
.
z VPN Pass-through
The router also supports VPN pass-through.
z 802.1X supported
When the 802.1X function is enabled, the Wireless user must authenticate to this router first
to use the Network service.
z Support WPA-PSK and WPA version 1 and 2
When the WPA function is enabled, the Wireless user must authenticate to this router first to
use the Network service
z SPI Mode Supported
When SPI Mode is enabled, the router will check every incoming packet to detect if this
packet is valid.
4