User's Manual

-26-
4.10 Wireless Setting
Wireless settings allow you to set the wireless configuration items.
1. Network ID(SSID): Network ID is used for identifying the WLAN. Client stations
can roam freely over this product and other Access Points that have the same
Network ID. (The factory setting is “default”)
2. Channel: The radio channel number. The permissible channels depend on the
Regulatory Domain. (The factory setting is channel 7)
3. Security: Select the data privacy algorithm you want. Enabling the security can
protect your data while it is transferred from one station to another. The standardized
IEEE 802.11 WEP (based on a 40 bit shared key) is used here. When you enable the
security, please input 10 hex-decimal digits (40 bits) in the text edit.
4. Wireless Access Control: The IEEE 802.11 standard allows for Access Control rules
based on the client station’s MAC address, and is fully implemented by this product.
Press “Settings...” button, the following page will be shown. You can control who can
make use of the wireless network in this page.