User Manual

-24-
4.10 Wireless Setting
Wireless settings allow you to set the wireless configuration items.
1. Network ID (SSID): Network ID is used to identify the WLAN. Client stations can
roam freely on this product and other Access Points that have the same Network ID.
(The factory setting is “default”)
2. Channel: The radio channel number. The permissible number of channels depends on
the Regulatory Domain.
The factory setting is as follow: Channel 6 for North America; Channel 7 for
European (ETSI); Channel 7 for Japan.
3. WEP Security: Select the data privacy algorithm you want. Enabling the security can
protect your data while it is transferred from one station to another. The standardized
IEEE 802.11 WEP (128 or 64-bit) is used here.
4. WEP Key 1, 2, 3 & 4: When you enable the 128 or 64 bit WEP key security, please
select one WEP key to be used and input 26 (for 128-bit) or 10 (for 64-bit)
hexi-decimal digits.