User's Manual
Table Of Contents
- Chapter 1 Introduction
- Chapter 2 Hardware Installation
- Chapter 3 Network Settings and Software Installation
- Chapter 4 Configuring Wireless Broadband Router
- Appendix A TCP/IP Configuration for Windows 95/98
- Appendix B 802.1x Setting
- Appendix C WPA-PSK and WPA
- Appendix D WDS Setting
- Appendix E FAQ and Troubleshooting
Virtual Computer enables you to use the original NAT feature, and allows you to setup the one-to-one
mapping of multiple global IP address and local IP address.
• Global IP: Enter the global IP address assigned by your ISP.
• Local IP: Enter the local IP address of your LAN PC corresponding to the global IP address.
• Enable: Check this item to enable the Virtual Computer feature.
4.4.2 DHCP Server
20