User's Manual

7
Link.
1~2
Link status Green On
An active station is connected to the corresponding
LAN port.
Blinking
The corresponding LAN port is sending or receiving
data.
Speed
10/100 Data Rate Green
On
Data is transmitting in 100Mbps on the corresponding
LAN port.
Reset To reset system settings to factory defaults
2.2 Procedure for Hardware Installation
2. Decide where to place your Wireless Broadband Router
You can place your Wireless Broadband Router on a desk or other flat surface, or you can mount it
on a wall. For optimal performance, place your Wireless Broadband Router in the center of your
office (or your home) in a location that is away from any potential source of interference, such as a
metal wall or microwave oven. This location must be close to power and network connection.
2. Setup LAN connection
a. Wired LAN connection: connects an Ethernet cable from your computer’s Ethernet port to one
of the LAN ports of this product.
b. Wireless LAN connection: locate this product at a proper position to gain the best transmit
performance.