User's Manual

Advanced Settings (Administrator only)

Example:

Configuration on NAT Router

Destination Subnet Mask Gateway Hop Enabled

192.168.1.0 255.255.255.0 192.168.123.216 1 ˇ

192.168.0.0 255.255.255.0 192.168.123.103 1 ˇ

If, for example, Client3 wanted to send an IP datagram to 192.168.0.2

(Client2), he would use the above table to determine that he had to go via

192.168.123.103 (Gateway2).

And if he sends Packets to 192.168.1.11 he will go via 192.168.123.216

(Gateway1).

Each rule can be enabled or disabled individually.

After the Routing Table setting is configured, click Save.

NG System Manual