User's Manual

Chapter 3 - Using the Web Configuration Server
Figure 50: System Log
The System Log window includes the following parameters:
Table 35: System Log Parameters
Parameter Description
IP Address for Syslog Server Enter the IP address of the syslog server. It is valid only on
your subnet LAN. Check to Enable this function.
E-mail Alert Enable Check if you want to enable Email alert (send syslog via
email).
  SMTP Server IP and Port - Enter the SMTP server IP and
port, which are concatenate with ':'.For example,
"mail.your_url.com" or "192.168.1.100:26". If you do not
specify port number, the default value is 25.
  E-mail addresses - The listed recipients will receive these
logs. You can assign more than 1 recipient, using a semi-
colon (;) or a comma (,) to separate the addresses.
  E-mail Subject - The subject of email alert. This setting is
optional.
  Username and Password - To fill some SMTP server's
authentication requirement, you may need to enter the
Username and Password provided by your ISP.
Log Type Select the activities to be logged.
Using the Web Configuration Server
74