User's Manual

Chapter 3 - Using the Web Configuration Server

Specify the following parameters for each ID:

Table 31: Virtual Server Parameters

Parameter Description

Protocol Select from TCP, UDP, * (all).

The default setting is *.

Service Ports Enter a port number, or a range of ports.

Server IP Enter the server IP on the LAN interface.

The range is 1~254.

Enable Check to enable the rule. Each rule can be enabled/disabled

individually.

Use Rule# Virtual Server can work with Scheduling Rules. For details,

please refer to Schedule Rule on page 80.

In addition, the Virtual Server page allows to easily select services from a

pre-defined list, and to assign to them a pre-defined rule.

  Well known services – Select a service from the list of pre-defined

services.

  The Schedule Rule option facilitates the process of selecting a

scheduling rule for each Virtual Server ID. Select a specific Schedule

Rule from the Schedule Rule Combo box. Select the Virtual Server ID to

which the schedule rule will apply from the ID Combo box and click

Copy to to copy the Schedule Rule number to the selected Virtual

Server ID.

3.8 .2 Spe cial AP

Some applications, such as Internet games, Video conferencing, Internet

telephony etc., require multiple connections. Because of the firewall

function, these applications cannot work with a pure NAT router. The

Special Applications window makes some of these applications work with

NAT router.

NOTE

Only one PC at a time can use each Special Application.

Using the Web Configuration Server