User's Manual

Chapter 3 - Using the Web Configuration Server
3.7 .5 Fire w a ll (Administra tor only)
Firewall rules deny/allow traffic from passing through the device.
Figure 41: Firewall
Up to 8 rules can be specified for each direction of traffic: inbound and
outbound. For each rule, you can define the following:
Table 29: Firewall Parameters
Parameter Description
Source IP address From LAN or WAN
Destination IP address From LAN or WAN
Destination Protocol TCP, UDP or ICMP
Destination Destination port number
Action Allow/Deny
The default is Allow
Enable Check to enable the rule. Each rule can be enabled/disabled
individually
Click Save to save your settings.
Using the Web Configuration Server
64