User's Manual

Basic Setting
Parameter Description
DTIM Interval Delivery Traffic Indication Message (DTIM) is a countdown
informing clients of the next window for listening to broadcast
and multicast messages.
The range is: 1~65535 seconds.
The default value is 3 seconds.
Wireless Mode The wireless mode supported: 802.11b, 802.11g, or both.
The default is both.
TX Rates Select the wireless transfer rate from the dropdown list,
based on the speed of wireless adapters on the WLAN.
The default is auto rate.
Preamble Type Defines the length of the Cyclic Redundancy Check (CRC)
block for communication between the Access Point and
roaming wireless adapters. A long transmit preamble may
provide a more reliable connection or slightly longer range. A
short transmit preamble provides better performance. Select
short/long or automatic preamble to be assigned to each
packet.
The default is auto mode.
Authentication Type Used for wireless authentication when associated with an AP
router.
  Open System
  Shared Key
  Both
The default is auto mode.
SSID Broadcast Enable/Disable broadcasting the network's ID.
The default is Enable.
Antenna Transmit Power Select the antenna's transmission power from the dropdown
list.
The default is 100% TX power (17 dBm).
NG System Manual
53