User's Manual

Chapter 3 - Using the Web Configuration Server

Figure 24: LAN Setup - DHCP Server Enabled

The LAN PC receives a DHCP IP address from the Networking Gateway. To

receive the DHCP IP address from the DHCP server, perform the following

procedure:

3 Set the DHCP Server parameter to Disable.

4 Set the DHCP Proxy parameter to Enable.

5 In the Proxy IP field, enter the IP of the DHCP server.

In addition, the LAN Setup window includes the following control buttons:

  Clients List – Opens a list of the current mapping of the IP and MAC

address for each DHCP client (see section 3.6.2.1)

  Fixed Mapping – Opens the MAC Address Control window for assigning a

specific IP address to the specified MAC address for DHCP clients (see

MAC Address Control

on page 52 for further details).

Using the Web Configuration Server