User's Manual

Basic Setting

3.6.1.5 PPTP

Some ISPs require the use of PPTP to connect to their services.

Figure 22: Primary Setup - PPTP

The Setup page for PPTP includes the following parameters:

Table 19: PPTP Parameters

Parameter Description

IP Mode Select one of the following options:

  Dynamic IP Address (this is the default setting)

  Static IP Address

My IP Address The private IP address assigned by your ISP. This parameter

is enabled only for Static IP Address mode.

My Subnet Mask The private subnet mask assigned by your ISP. This

parameter is enabled only for Static IP Address mode.

WAN Gateway IP The WAN Gateway IP address. This parameter is enabled

only for Static IP Address mode.

Address/Name The IP address/Name of the PPTP server.

PPTP Account The user account assigned by your ISP.

A string of maximum 53 characters.

Connection ID Enter the connection ID if your ISP requires it (optional).

NG System Manual