User's Manual

Chapter 3 - Using the Web Configuration Server

  Dynamic IP Address with Road Runner Session Management (e.g.

Telstra BigPond). See section 3.6.1.3.

  PPP over Ethernet: Some ISPs require the use of PPPoE to connect to

their services. See section 3.6.1.4.

  PPTP: Some ISPs require the use of PPTP to connect to their services.

See section 3.6.1.5.

For each WAN type selected, a different Primary Setup window appears, as

follows. You can change the WAN type by clicking on Change and selecting

a different WAN type.

3.6.1.1 Static IP Address

Figure 18: Primary Setup - Static IP Address

The Setup page for Static IP Address includes the following parameters

provided by the service provider:

Table 15: Static IP Address Parameters

Parameter Description

WAN IP Address The IP address of the WAN port.

The default is 0.0.0.0.

WAN Subnet Mask The IP subnet mask of the WAN port.

The default is 255.255.255.0

WAN Gateway The Default Gateway IP address of the unit.

Using the Web Configuration Server