User's Manual

Basic Setting
NOTE
  The Reboot button is not available at first entry to the Primary Setup window and appears
only after saving your changes.
  For user entry level (public password), the parameter fields in all WAN type screens are
disabled (for display only).
IMPORTANT
Changes to the Primary Setup window will take effect only after rebooting the system.
The default WAN type is Dynamic IP Address. However, you can change
the WAN type as follows:
To select a different WAN type:
1 Click Change. The Choose WAN Type window opens.
Figure 17: Choose WAN Type
2 Select one of the following types:
  Static IP Address: The ISP provides you with a static IP address. See
section
3.6.1.1
.
  Dynamic IP Address: Automatically obtain an IP address from the
ISP. See section 3.6.1.2
. This is the default setting.
NG System Manual
35