User's Manual

Wizard (Administrator only)
Set the following parameters:
Table 13: Setup Wizard – PPTP Parameters
Parameter Description
LAN IP Address The local IP address of the device.
The default IP address is 192.168.254.253. . To change the
IP address enter a new value.
IP Mode select one of the following options:
  Dynamic IP Address (this is the default setting)
  Static IP Address
My IP Address The private IP address assigned by the service provider after
connection. When in Static Mode, the IP address must be
configured manually.
My Subnet Mask The private subnet mask assigned by the service provider
after connection. When in Static Mode, the subnet mask must
be configured manually.
WAN Gateway IP The WAN Gateway IP address after connection. When in
Static Mode, the IP address must be configured manually.
Server IP Address/Name The IP address/Name of the PPTP server.
PPTP Account The user account assigned by the service provider.
A string of up to 53 characters
PPTP Password The password assigned by the service provider. If you do not
want to change the password, leave this field empty. At initial
entry, you are required to enter a password.
A string of up to 53 characters
4 After setting the appropriate parameters, the following window appears:
NG System Manual
31