User's Manual

Chapter 3 - Using the Web Configuration Server
Set the following parameters:
Table 12: Setup Wizard – PPPoE Parameters
Parameter Description
LAN IP Address The local IP address of the device.
The default IP address is 192.168.254.253. To change the IP
address enter a new value.
Account The account provided by the service provider.
A string of up to 53 printable characters.
The default is an empty field.
Password The password provided by the service provider. If you do not
want to change the password, leave empty. At initial entry,
you are required to enter a password.
A string of up to 53 printable characters.
Primary DNS The DNS provided by your ISP. To use a specific DNS, enter
a specific address. Leave the default 0.0.0.0 setting to
automatically assign the parameter.
Secondary DNS The backup DNS provided by the service provider. (optional)
  PPTP
Figure 12: Setup Wizard – PPTP
Using the Web Configuration Server
30