User's Manual

Wizard (Administrator only)
Set the following parameters provided by your ISP:
Table 9: Setup Wizard – Static IP Address Parameters
Parameter Description
LAN IP Address Sets the local IP address of the device.
Static IP Address The IP address of the WAN port.
The default is 0.0.0.0.
Static Subnet Mask The subnet mask of the WAN port.
The default is 0.0.0.0.
Static Gateway The Default Gateway IP address of the unit.
The default is 0.0.0.0.
Static Primary DNS The IP address of the primary Domain Name Server.
The default is 0.0.0.0.
Static Secondary DNS The IP address of the secondary Domain Name Server.
The default is 0.0.0.0.
  Dynamic IP Address
Figure 9: Setup Wizard - Dynamic IP Address
NG System Manual
27