User's Manual

Status
3.4 Sta t us
The Status window appears in the main window upon successful log in. The
window can be accessed at any time by clicking on the Status menu on the
menu list.
Figure 5: System Status
The Status window provides information for observing the product's working
status, as follows:
Table 8: Status Window Parameters
Parameter Description
Remaining Lease Time A counter displaying the remaining time (in hh:mm:ss) in
which unit will request a new IP. When the lease time expires,
a new IP address will be automatically allocated, or the lease
will be automatically renewed, depending on the settings (see
sections
3.6.1.2
and 3.6.1.3.
This field is relevant only for Dynamic IP Address mode and
will not appear in any of the other modes.
  Renew (Administrator only) – In Dynamic IP Address
mode, click to reset the Lease Time. The gateway will
request an IP address from the DHCP server.
  In Static IP Address, PPPoE and PPTP modes, the WAN
type is specified in the sidenote (Static IP, PPPoE, or
PPTP, respectively).
NG System Manual
23