User's Manual

Accessing the Web Configuration Server
3.2 Acc e ssing the Web Configuration
Serve r
Follow the steps below to access the Web Configuration Server:
1 Connect the unit to the AC mains.
2 Connect PC to LAN port 1.
NOTE
When connecting from WAN, make sure that a remote administrator is enabled (see
section 3.7.6), and enter the WAN IP address specified in the System Status window (see
section 3.4) using TCP port 88.
IMPORTANT
When managing the NG via bwaNMS (using the cut through option), the Remote
Administrator Port must be set to 8080.
3 Open a web browser (Internet Explorer or Netscape Communicator).
NOTE
Be sure to disable the proxy on your Web browser or add the IP address of the product
into the proxy exceptions.
4 Type http://192.168.254.253 in the Address (IE) or Location (Netscape)
field and click Enter.
5 If the Web Configuration Server is password protected, you will be
prompted to enter your password in order to login to the system (see
section
3.3
).
6 The Web Configuration Server main view appears on the screen.
NG System Manual
19