User's Manual

Web Configuration Server’s Parameters Summary
  DUT authenticate PC2 using PEAP-TLS.
1 PC2 choose the SSID of DUT as the Access Point.
2 Set authentication type of wireless client and RADIUS server
both to PEAP_TLS.
3 Disable the wireless connection and enable again.
4 The DUT will send the user's certificate to the RADIUS server,
and then send the message of authentication result to PC2.
5 Windows XP will prompt that the authentication process is
success or fail and end the authentication procedure.
6 Terminate the test steps when PC2 get dynamic IP and PING
remote host successfully.
  Support Type: The router supports the types of 802.1x Authentication:
PEAP-CHAPv2 and PEAP-TLS.
NOTE
  PC1 is on Windows XP platform without Service Pack 1.
  PC2 is on Windows XP platform with Service Pack 1a.
  PEAP is supported on Windows XP with Service Pack 1 only.
  Windows XP with Service Pack 1 allows 802.1x authentication only when data
encryption function is enable.
NG System Manual
117