User's Manual

Web Configuration Server’s Parameters Summary
4 Change EAP type to fit the variable test condition.
  Windows 2000 RADIUS server Authentication testing:
  DUT authenticate PC1 using certificate. (PC2 follows the same test
procedures.)
1 Download and install the certificate on PC1. (Fig 4)
2 PC1 choose the SSID of DUT as the Access Point.
3 Set authentication type of wireless client and RADIUS server
both to EAP_TLS.
4 Disable the wireless connection and enable again.
5 The DUT will send the user's certificate to the RADIUS server,
and then
6 send the message of authentication result to PC1. (Fig 5)
7 Windows XP will prompt that the authentication process is
success or fail and end the authentication procedure. (Fig 6)
8 Terminate the test steps when PC1 get dynamic IP and PING
remote host successfully.
NG System Manual
115