User's Manual

2.2 Making Connections
In order to access the MGB100 as the network storage drive or as an AP, you
may need to configure the TCP/IP settings correctly. Either the “Wired
Ethernet settings” or “Wireless Connection” can be used to connect the
MGB100 easily.
2.2.1 Check TCP/IP Settings
MGB100 will detect automatically if the DHCP server is existed, it will get a IP
address form DHCP server. If there is no DHCP server, MGB100 will assign a
random IP to client and you can get some information as below shown.
First, go to the command mode and key “ipconfig”. If the IP address and
subnet is 0.0.0.0, please key “ipconfig /renew” as follows:
14