User's Manual

Chapter 2 Getting Start
2.1 How to operate
Please prepare 1 router (Wire / Wi-Fi function) before you setup this Wi-Fi Melody Station, you can
follow the steps as below to setup this machine once you get ready.
Step 1. Power on:
Plug in power adapter and press the power switch on to activate this
machine.
Step 2. Connect to Wi-Fi Router from AP lists
If you have a router with Wi-Fi function, this Wi-Fi Internet Melody
Station will automatically find the available AP lists for you to select.
(See Chapter 2.1.1 to do the detailed setup)
Step 3. Connect to wired Router
If you want to connect with your router (AP) by a RJ45 cable, you can
go ‘Setup’ to change advance setting / configure network to wired
client/ AP mode. (See Chapter 2.1.1 to do the detailed setup)
2.1.1 Easy Wizard
When you power on Wireless Melody Station, it will lead you to choose the main language and
V-Tuner language (see as Fig. 1-1)
Main language:
Internet Radio (v-Tuner) language:
Fig. 1-1
Note: Please note that all screens we captured
are for your reference. Only if you find any
inconsistency in this document, please follow
the MMI on machine.
It will auto run and detect AP lists after finishing the language setting, if you select the AP without
encryption, press ‘ok’ to continue. (see as Fig. 1-2), if you select the AP with key, then it will auto
detect the type of encryption, then key-in the password, press ‘ok’ to continue. (See as Fig. 1-3)