User's Manual

Listen to FM Radio
To listen the music or broadcast programs from local FM radio stations, please select the “FM
Radio” function from the main menu and then press the OK button to switch get activate the FM
Radio function.
The first screen of FM Radio function shows 4 items for you to select:
“Station List”: Retrieve the tuned radio station lists from the device.
“Favorite Stations”: Retrieve the favorite station lists that stored in the device.
“Update List”: Activate the auto scan procedure to discover all the available FM stations, and
keeps the tuned stations in the device memory.
“Direct Access”: Allow you to fine tune the frequency of the station or tune to previous / next FM
station manually.
For first time to use the FM Radio function stretching out the antenna cable as possible as you can.
After the antenna cable is placed properly, activate the “Update List” function first to make a
complete scan for pre-setting the available FM stations. It takes few seconds to perform the scan
operation. After that, you can easily tune to the stations.
The following screen shots illustrate the sequence to pre-set the FM stations and tune to a specific
ratio station 98.70 MHz and start to listen the broadcast program from it.
to screen on
the right
Screen shot to next screen Comment
1
“OK” button or
press the right
rotary wheel.
Initial screen
2
“” button or
“OK” button or
press the right
rotary wheel.
3
“” button
(2 times) or
rotate right
rotary wheel
clockwise.
“” button or
“OK” button or
press the right
rotary wheel.
4
Pre-setting the FM
station list depends on
the signal reception
quality.
5
There are 15 station
been tuned.
6
“” button
(8 times) or
rotate right
rotary wheel
clockwise.
“” button or
“OK” button or
press the right
rotary wheel.
Press “<” button on the
remote controller or
press option button on
the machine to add
current station to
favorite list.
7
Tuned to station and
music started.