User's Manual

Configure as an Wired Client
If there is no any 802.11b/g wireless network in your home, and only wired 802.3 network is
available, the Music Player device can also connect to the wired network through an Ethernet
cable.
In this situation, prior to power on the device, you have to plug the Ethernet cable into the RJ45
connector. And then power on the device. The device will automatically get into the wired client
mode when it detects a link status through the Ethernet connection during device is up.
(A) Device first time using, with an Ethernet cable plugged:
to screen on
the right
Screen shot to next screen Comment
1 “Company Logo”
Initial screen
2
“” button or
“OK” button or
press the right
rotary wheel.
Select the MMI language.
3
“” button or
“OK” button or
press the right
rotary wheel.
Select the internet radio
menu language.
4
5
Press STOP on
remote controller
6
7
“” button
(5 times) or
rotate right
rotary wheel
clockwise.
“OK” button or
press the right
rotary wheel.
8
“” button
(4 times) or
rotate right
rotary wheel
clockwise.
“” button or
“OK” button or
press the right
rotary wheel.
9
“” button
(1 times) or
rotate right
rotary wheel
clockwise.
“” button or
“OK” button or
press the right
rotary wheel.