User's Manual

(C) WPS button for Wireless Client Mode:
You can use WPS button on the back of this device to connect with a Router which
has a WPS button wirelessly, please follow the steps as below to connect.
to screen on
the right
Screen shot to next screen Comment
1
Press the WPS button
on the back of the
machine, and also
press the WPS button
on your Router.
2
This device will process
WPS connection with
Router automatically.
3
This device will show
‘successful’ on screen.
4
Then Rebooting.
The device is in
wireless client mode
now.
5
The device already
connected to your
network.
6
Fail to connect.
If you can’t connect with AP by WPS button, we
suggest you should check the following,
1. It should be distanced at least 30cm
between router and client device.
2. It may have another WPS been triggered
when you connect, please try again.