User's Manual

(B) Manually configured as the Wireless Client Mode:
to screen on
the right
Screen shot to next screen Comment
1
“OK” button or
press the right
rotary wheel.
Initial screen
2
“” button
(4 times) or
rotate right
rotary wheel
clockwise.
“” button or
“OK” button or
press the right
rotary wheel.
3
“” button
(1 times) or
rotate right
rotary wheel
clockwise.
“” button or
“OK” button or
press the right
rotary wheel.
4
“” button or
“OK” button or
press the right
rotary wheel.
Manually select the
wireless client mode.
5
Scanning for available
APs.
Please select WPS
Disable if your router has
no this function.
6
“” button
(1 times) or
rotate right
rotary wheel
clockwise.
“” button or
“OK” button or
press the right
rotary wheel.
Select the AP that you
can connect to your
router device.
7
Numeric key
pads
“OK” button or
press the right
rotary wheel.
You can use the numeric
/ alphabet keypad on
remote controller to input
the WEP key, or you can
use the option button to
change the
abc/ABC/123/~!# input.
8
“” button or
“OK” button or
press the right
rotary wheel.
Confirm to the settings
above.
9
Apply new settings.
10
The device is in wireless
client mode now.
11
The device already
connected to your
network.