User's Manual Part 2

錯誤! 尚未定義樣式。
Wireless Networking Gateway System Manual
3-47
Figure 43: System Log
 IP Address for Syslog Server – Enter the IP address of the syslog
server. It is valid only on your subnet LAN. Check to Enable this
function.
 E-mail Alert Enable - Check if you want to enable Email alert (send
syslog via email).
¾ SMTP Server IP and Port - Enter the SMTP server IP and port,
which are concatenate with ':'.For example,
"mail.your_url.com" or "192.168.1.100:26". If you do not
specify port number, the default value is 25.
¾ E-mail addresses - The listed recipients will receive these
logs. You can assign more than 1 recipient, using a semi-
colon (;) or a comma (,) to separate the addresses.
¾ E-mail Subject - The subject of email alert. This setting is
optional.
¾ Username and Password - To fill some SMTP server's
authentication requirement, you may need to enter the
Username and Password provided by your ISP.
 Log Type - Select the activities to be logged.
NOTE
The changes made in the System Log page become effective upon clicking Save.
Rebooting the system is not required.
刪除: Set TCP/IP Protocol
for Working with NAT
Router
刪除: Wizard