User's Manual Part 2

Chapter 錯誤! 尚未定義樣式。 - 錯誤! 尚未定義樣式。
錯誤! 尚未定義樣式。
3-58
To upgrade the firmware, click on Browse to browse to the file's location
and click Upgrade to begin the upgrading process, or Cancel to
terminating it.
Backup Setting
Backup your settings by clicking Backup Setting in the menu list. This
automatically opens the File Download window.
Select the Save this file to disk option and click OK. Follow the
instructions on screen to save the file. The file is saved as a .bin file.
Figure 56: Backup
To restore these settings, select Firmware Upgrade from the Menu list,
browse to the .bin file you saved, and click Upgrade (see Firmware
Upgrade on page 3-57).
Reset to Default
To reset this product to factory defaults, click Reset to default in the
menu list. The following message appears.
Figure 57: Reset to Default
Click OK to reset the settings to default, or Cancel to keep the current
settings.
刪除: 3
刪除: 3
刪除: Operation and
Administration
刪除: Operation and
Administration