User's Manual Part 1

錯誤! 尚未定義樣式。
Wireless Networking Gateway System Manual
3-27
 MAC Address Control – Check "Enable" to enable the MAC Address
Control feature.
 Connection control – Check the "Connection control" check box to
enable controlling which wired and wireless clients can connect to
this device. If a client is denied the connection to this device, he will
not be able to access the Internet either. Select allow/deny to allow
or deny clients whose MAC addresses are not in the "Control table"
(see below) to connect to this device. ("deny" is the default setting.)
A wired client who is allowed to connect to the device has full access
to the Internet and to network resources. When denied the
connection to the device, he can communicate with other clients on
the wired LAN, but cannot connect to the Internet, use the Print
Server function, communicate with clients on the wireless LAN, or
use the Web configuration.
 Association control – "Association" refers to the exchanging of
information between wireless clients and the device to establish a
link between them. A wireless client is able to transmit and receive
data to the device only after successful association. Check
"Association control" check box to control which wireless clients can
associate to the wireless LAN. If a client is denied the association to
the wireless LAN, he will not be able to send or receive any data via
this device. Select allow/deny to allow or deny clients whose MAC
addresses are not in the "Control table" to associate to the wireless
LAN.
A wireless client who is allowed both to associate to the wireless
LAN and to connect to the device has full access to the Internet and
to network resources.
When allowed to associate to the wireless LAN, but denied to
connect to the device, he can communicate with other clients on the
LAN (wired and wireless), but cannot connect to the Internet, use
the Print Server function, or use the Web configuration.
When denied to associate to the wireless LAN, the client cannot
communicate with other clients on the LAN (wired or wireless),
connect to the internet, use the Print Server function, or use the
Web configuration. [TBD – provide a summary table]
NOTE
Association control does not affect wired clients.
刪除: Set TCP/IP Protocol
for Working with NAT
Router
刪除: Wizard