User's Manual Part 1

錯誤! 尚未定義樣式。
Wireless Networking Gateway System Manual
3-25
¾ WPA (Wi-Fi Protected Access) – improves data protection and
implements access control to Wireless LAN systems. Frames
transmitted through a wireless module are encrypted using a
Pre-share key (PSK) or a key received from the RADIUS
server.
 RADIUS Server IP – The 802.1x server's IP address.
 RADIUS Port – The 802.1x server's service port.
 RADIUS Shared Key – Key value shared by the RADIUS
server and the networking gateway. The key value is
consistent with the one in the RADIUS server.
IMPORTANT
If you enable the 802.1x or WPA feature, you must have a RADIUS server available.
Advanced Wireless Setting
Clicking the Advanced Wireless Setting button that appears in the
Wireless Setting window opens the Advanced Wireless Setting window.
Figure 23: Advanced Wireless Setting
Enter the following parameters:
 Beacon Interval – Specify the intervals (in milliseconds) between
beacons (the range is 1~1000 milliseconds, the default is 100
milliseconds).
刪除: Set TCP/IP Protocol
for Working with NAT
Router
刪除: Wizard
格式化: 項目符號及編號
刪除: <#>RADIUS Server
IP – The 802.1x server's
IP address.
<#>RADIUS Port – The
802.1x server's service
port.
<#>RADIUS Shared Key –
Key value shared by the
RADIUS server and the
networking gateway. The
key value is consistent
with the one in the
RADIUS server.