User's Manual Part 1

錯誤! 尚未定義樣式。
Wireless Networking Gateway System Manual
3-19
PPTP
Some ISPs require the use of PPTP to connect to their services.
Figure 17: Primary Setup - PPTP
 IP Mode – select one of the following options:
¾ Dynamic IP Address (this is the default setting)
¾ Static IP Address
 My IP Address – The private IP address assigned by your ISP.
 My Subnet Mask - The private subnet mask assigned by your ISP.
 WAN Gateway IP – The WAN Gateway IP address.
 Server IP Address/Name: the IP address/Name of the PPTP server.
 PPTP Account – The account assigned by your ISP.
 PPTP Password - The password assigned by your ISP. If you do not
want to change the password, leave this field empty.
 Connection ID - Enter the connection ID if your ISP requires it
(optional).
 Maximum Idle Time - The amount of time of inactivity before
disconnecting your PPTP session. To disable this feature, set this
parameter to 0 seconds, or enable Auto-reconnect.

Connection Control – Authentication for IP allocation. Select one of
the following options:
刪除: Set TCP/IP Protocol
for Working with NAT
Router
刪除: Wizard
格式化: 項目符號及編號