User's Manual Part 1

錯誤! 尚未定義樣式。
Wireless Networking Gateway System Manual
3-13
1. Click Change. The Choose WAN Type window opens.
Figure 12: Choose WAN Type
2. Select one of the following types:
¾ Static IP Address: The ISP provides you with a static IP
address.
¾ Dynamic IP Address: Automatically obtain an IP address
from the ISP.
¾ Dynamic IP Address with Road Runner Session Management.
(e.g. Telstra BigPond) (default)
¾ PPP over Ethernet: Some ISPs require the use of PPPoE to
connect to their services.
¾ PPTP: Some ISPs require the use of PPTP to connect to their
services.
For each WAN type selected, a different Primary Setup window appears,
as follows. You can change the WAN type by clicking on Change and
selecting a different WAN type.
刪除: Set TCP/IP Protocol
for Working with NAT
Router
刪除: Wizard