User's Manual Part 1

Chapter 錯誤! 尚未定義樣式。 - 錯誤! 尚未定義樣式。
錯誤! 尚未定義樣式。
3-12
Figure 11: WAN Setup/Primary Setup
From the WAN Setup window you can:
 Set the WAN type – allows you to select the WAN connection type of
your ISP.
 Enter the Host Name (optional)
 Set WAN's MAC Address
 Enable/Disable Renew IP Forever
 NAT – Enable/Disable - When disabled, the gateway functions as a
regular router as opposed to a NAT router. This option is available
in the Primary Setup window for all WAN types.
NOTE
 The Reboot button is not available at first entry to the Primary Setup window and
appears only after saving your changes.
 For client entry level (public password), the parameter fields in all WAN type
screens are disabled (for display only).
IMPORTANT
Changes to the Primary Setup window will take effect only after rebooting the system.
The default WAN type is Dynamic IP Address with Road Runner
Session Management. However, you can change the WAN type as
follows:
To select a different WAN type:
刪除: 3
刪除: 3
刪除: Operation and
Administration
刪除: Operation and
Administration